Testing the mechanical properties of materials under bending load is one of the basic methods for testing the mechanical properties of materials. Bending Testing Fixtures with Tensile Testing Machine is mainly used to measure the bending strength of brittle and low plastic materials (such as cast iron, high carbon steel, tool steel, etc.) and can reflect the deflection of plastic indicators. Bending tests can also be used to check the surface quality of materials. The bending test was carried out on the universal material machine. There were two loading modes: three-point bending and four-point bending.
EVA Stripping Fixture detection used as a photovoltaic module packaging EVA, mainly put forward the following performance requirements:
A. Breaking tension strength: the breaking tension strength of EVA after bonding reflects the breaking mechanical strength of EVA after bonding.
B. Fracture elongation rate: the fracture elongation rate of EVA after bonding reflects the extension property of EVA after bonding.
C. Peeling strength of photovoltaic material tensile testing machine: reflects the bonding strength of EVA and glass.
180° Peeling Fixtures with Tensile Testing Machine usage: 180° Peeling Fixtures with Tensile Testing Machine is used in the configuration of tension machine, can be applied to textile, tape, adhesive products, plastic film, plastic, composite board and other industries for 90 degree peel strength test.
We are factory with kinds of testing machines including Puncture Fixtures For Universal Testing Machine, it is an auxiliary tool with tensile testing machine. According to change the different fixtures, the machine test various of materials.
Spring Compression Test with Tensile Testing Equipment is used to test physical properties of elongation, compression, peeling, tearing bending, 3-point bending, shearing of metallic and non-metallic material and so on. The fixture is important to clamp the material. Attention please: the fixtures need to use with our machines.
The extensometer of Electronic Rubber Tensile Extensometer is an instrument to measure the line deformation between two points of components and other objects. It is usually composed of three parts: sensor, amplifier and recorder. The extensometer is a sensor to feel the deformation of the specimen. The strain gauge extensometer is widely used in the market because of its simple principle and convenient installation. There are many kinds of extensometers, which can be roughly divided into mechanical extensometers, optical extensometers and electromagnetic extensometers. The sensitivity of these extensors is generally up to 1 micron. Several representative extensometers are introduced below.
