fully automatic insertion and extraction force tester

QT-1220S fully automatic insertion and extraction force tester Product technical parameters：

1、The machine specification：

The 1220S fully automatic plug and pull force tester is applicable to the test of the insertion and pull out force of various connectors and terminals. With the automatic centering device designed by Qiantong specialty, it can measure the completely accurate plug and pull force test. With the Qiantong special plug and pull force tester software, it can display the operation interface in Chinese and English. The operation is simple and convenient, and all data can be stored (test conditions, displacement curves, life curves, inspection reports, etc.)

2、Technical specifications：

1. Maximum test force: 1000N, 500N, 200N, 10N (optional);

2. The sampling frequency is 100Hz;

3. Accurate measurement: Class 0.5;

4. Minimum resolution: 0.01Kg or 1g;    

5. Maximum measuring height: 150mm;      

6. Minimum fine adjustment distance: 0.01mm;        

7. Measuring speed range: 0.05-200mm/min;  

8. XY axis movement range: 0-75mm;      

9. Appearance dimension: 360 * 260 * 940mm;    

10. Weight: 70Kg (machine);          

11. Power supply: 220V 50Hz 200W;

3、Test items:

1. Connector single hole plug test;  

2. Full row plug and pull test of connector;

3. Connector plug life test;  

4. Connector single pin and plastic retention test;

5. Connector NORMAL FORCE test;

6. General compression and tensile failure test;

4、Instrument features:

1. The test conditions can be set and stored by the computer. Select Settings from the drop-down menu or enter data directly. (including test category, measuring movement direction, load measuring range, travel measuring range, travel origin position, travel origin detection, measuring speed, total measuring times, pause time, waiting position each time, air pressure times);

2. It can print and store graphs (plugging displacement curve, load decay life curve, inspection report);

3. Double protection function for overload of load element;

4. Load unit display N, lb, gf, kgf can be switched freely;

5. The test data is stored on the hard disk (each data can be stored for an unlimited number of times);

6. The test conditions can be set by the computer screen, which is convenient and fast (including plugging travel, speed, pause time, etc.);

7. The contents of the inspection report header can be modified at any time (both in Chinese and English);

8. Curve chart report and text report can be specified by the customer with header and LOGO;

9. The inspection report can be transferred to. WORD for editing;

10. The contents of the inspection report header can be modified at any time (both in Chinese and English);

11. With the dynamic impedance test system, the dynamic impedance can be tested and the load impedance travel curve can be drawn at the same time when testing the plugging force.

5、The standard accessories：

1、Sensor: optional within 50kg of American transmission force                           1 set

2、1220S test host                                                                1 set

3、Measurement software: 64 bit Chinese and English measurement software (with impedance function)                     1 set

4、Control motor: Panasonic servo motor+servo driver                                   1 set

5、Transmission screw: Taiwan TBI precision ball screw                                 2 pieces

6、Displacement system: Japanese internal secret control high-precision encoder               1 set

7、Test tooling: a. X-Y test mobile station

                       b. Automatic position correction device for whole row connector

                       c. Clamp for whole row connector                                      1 set

8、Test computer: Taiwan Advantech original industrial computer+Lenovo 18.5-inch display screen         1 set