Izod Impact tester

Machine description

QT-5202 Izod Impact tester is used to test impact strength and toughness of the plastic,PA, ceramic, cast stone, plastic electronics,insulation material and other non-metal material. Specimen size is directly entered in the Digital touch screen control system. After testing, it will display the impact strength.(In American standard and international standard). It is a common instrument adapted by institutions, universities, and other non-metal material manufacturer to conduct quality test. The machine is a simple structure. It is precise and user-friendly. The machine meets the requirement about ISO179---92,and GB1043-93.

It meets international standard IS0180--1992 plastic-hard material for overhanging arm impact strength testing standard；national standard GB/T1843-1996 hard for overhanging arm hard material impact testing ,machine industry standard JB/T8761-1998 plastic overhanging-arm impact testing machine.

Technical specification

1.Impact speed : 2.9m/s；

2.Swing energy: 2J 4J 5J ；

3.Swing angle: 150゜；

4. Fillet radius of impact edge:  r = 2mm;

5. Included angle of blade:  30 ± 1 º;

6. Jaw fillet radius:  1.0 ± 0.1mm;

7. Distance between jaw support lines:  62mm;

8. Pendulum force distance:  pd0 5=0.26795Nm  pd1=0.53590Nm  pd2=1.07180Nm  

pd4=2.14359Nm   pd5=2.67949Nm；

9. Strike center distance:  230mm;

10. Sample size (length, width and thickness):  80 × ten × 4mm；

11. Overall dimension (length, width and height):  420 × two hundred and fifty × 650；

12. Power supply:  220V 50Hz 200W;

13. Executive standard:  gb1043-92, iso179;

14. Weight:  60kg

Standard configuration

1. Console                                                                 1 set

2. Screen                                                                   1 set

3. PLC                                                                       1 set

4. Swing                                                                    1 set

5. Weight                                                                   1 pair

6. Gradienter                                                              1 piece

7. Fixture jag                                                              2 pieces(including the on fixture mount)

8. Middle sample plate                                                 1 piece

9. Power line                                                               1 piece

10. Instruction book                                                     1 piece

11. Quality certificate                                                    1 piece

12. Inventory list                                                          1 piece