Electro-hydraulic servo universal material tester 3000kN

Model：QT-60300WS Electro-hydraulic servo universal material tester 3000kN

Product picture:(for reference only)

Product technical parameters：

The machine specification：

Qt-60300ws 300T electro-hydraulic servo horizontal tensile testing machine adopts full digital high response measurement system based on DSP. The whole process of load and strain measurement is not divided, and the test resolution is up to 1 / 200000. Meet the requirements of relevant GB standards and automatically obtain the result parameters specified in relevant standards (corresponding fixtures or deformation measuring devices shall be configured if necessary).

Main functions:

It is used for tensile and tear tests of various metal materials, woven belts, packaging belts, ropes and other materials, as well as special tests of products.

Main features:

1. The mechanical performance indexes of the tested materials are analyzed and calculated by human-computer interaction. At the end of the test, the elastic modulus, yield strength and non proportional elongation stress are calculated automatically. On the basis of automatic analysis, the analysis results can also be modified manually to improve the accuracy of the analysis.

2. It can make many kinds of curves, such as force deformation, force displacement, force time, stress-strain, deformation time, displacement time, etc;

3. Local amplification of test curve and superposition comparison of multiple curves;

4. There are two control modes: automatic control and manual control. Manual control is separated from the computer control program to complete the test independently; The automatic control is a full digital operation servo mode, with two modes of full-automatic control and man-machine dialogue self programming control to set the test conditions.

5. Various uses: it can carry out tensile, compression, bending, shear, peeling, tearing, low cycle and other tests on metal, non-metal and components. It can meet various test method standards such as ISO, JIS, STM, DIN, GB, etc.

6. The oil source adopts silent design, environmental protection, humanization and unique differential pressure servo system to reduce energy consumption, reduce heating and protect the oil circuit;

7. The high-speed DSP platform has high integration, powerful control, data processing ability and high reliability, which can not be compared with the test machine with other processors.

Meet the following standards:

GB / T 2611-92 general technical requirements for testing machines

JB / T 8612 electro hydraulic servo universal material testing machine

JJG 475-2008 tension, pressure and universal testing machine

Main performance indexes:

1. Maximum test force: 3000KN;

2. Accuracy grade of testing machine: Grade 1;

3. Relative error of test force indication: ± 1%;

4. Measuring range of test force: 1% - 100% FS (no grading in the whole process);

5. Piston moving speed range: 0.1-200 mm / min;

6. Loading rate range of test force: 0.02% - 2% FS / S;

7. Effective distance between guide rails (width): 550 mm;

8. Maximum stretching space: 10M;

9. Effective stretching stroke: 1500 mm;

10. Safety protection device: metal safety cover;

11. Overall dimension of host: about 10000 × one thousand × 680 (L) × wide × Height (mm);

12. Overall dimension of oil source: 1100 × one thousand × 1200 (long) × wide × Height (mm);

13. Total power: 5kW (three-phase five wire AC380V 50Hz);

14. Weight: about 8000 kg;

 The standard accessories：

Remark：

1、 Invoice: the above quotation includes Proforma invoice；         

2、 Payment method:  payment before delivery；

3、 Delivery time: 3 working days after receiving the deposit；   

4、 Artificial damage, force majeure, pliers are vulnerable parts, are not within the scope of warranty.