China xenon lamp aging test chamber Suppliers, Manufacturers - Factory Direct Price

Product Description

Model：SN-150 xenon lamp aging test chamber

Product picture:(for reference only)

Product introduction

The destruction of materials by sunlight and moisture in nature causes incalculable economic losses every year. The damage caused mainly includes fading, yellowing, discoloration, strength reduction, embrittlement, oxidation, brightness reduction, cracking, blurring and chalking. For products and materials exposed to direct or through glass windows, the risk of light damage is the greatest. Materials exposed to fluorescent lamps, halogen lamps or other light-emitting lamps for a long time will also be affected by photodegradation.

QT-SN-150 xenon lamp aging test chamber uses xenon arc lamp which can simulate the full sunlight spectrum to reproduce the destructive light waves existing in different environments. The equipment can provide corresponding environmental simulation and accelerated test for scientific research, product development and quality control.

QT-SN-150 xenon lamp aging test chamber can be used in the selection of new materials, the improvement of existing materials or the evaluation of changes in durability after changes in material composition. The equipment can well simulate the changes of materials exposed to sunlight under different environmental conditions.

Simulated full sunlight spectrum

The light resistance of the material is determined by exposing the material to ultraviolet (UV), visible and infrared light. It uses the filtered xenon arc lamp to produce the full sunlight spectrum with the greatest consistency with the sunlight. The xenon arc lamp with reasonable filtering treatment is the best way to test the sensitivity of the product to ultraviolet and visible light in the long wavelength range in direct light or sunlight through the glass.

Light resistance test of indoor materials

Due to long-term exposure to fluorescent lamps, halogen lamps or other light-emitting lamps, products placed in retail outlets, warehouses or other environments will also undergo significant photodegradation. The test chamber can simulate and reproduce the destructive light generated in such commercial lighting environment, and can accelerate the test process with higher intensity.

Relative humidity control

Provide relative humidity control function, which is very important for many humidity sensitive materials, and many test protocols also require humidity control.

The equipment adopts a full spectrum xenon arc lamp to simulate the destructive light waves in the sunlight, including UV, visible light and infrared light. According to the desired effect, the light of xenon lamp is usually filtered to produce a suitable spectrum, such as direct sunlight spectrum, sunlight spectrum through glass window or UV spectrum. Each filter produces a different light energy distribution.

The service life of the lamp depends on the irradiance level used. The service life of the lamp is 1000 hours. The replacement of lamp tube is convenient and fast. The long-lasting filter ensures that the required spectrum is maintained.

When you expose the product to the direct sunlight outdoors, the maximum exposure time of the product in a day is a few hours. Even so, the most severe exposure occurs only in the hottest weeks of the summer. Xenon lamp weather resistance test equipment can speed up your test process, because through program control, the equipment can expose your product to a light environment equivalent to summer noon sunshine 24 hours a day. The average light intensity and light hours / days are much higher than outdoor exposure. Therefore, the test results can be obtained quickly.

Effects of rain erosion and moisture

Due to the frequent scouring from rainwater, the coating layer of wood, including paint and colorant, will have corresponding erosion. This rain washing action can wash away the coating layer with anti degradation effect on the material surface, thus directly exposing the material itself to the destructive effects of UV and moisture. The rain water spray function of the equipment can reproduce such environmental conditions to enhance the correlation of climate aging tests of some coatings. The spray cycle is completely controlled by the program and can be carried out under the light cycle or no light cycle. In addition to simulating the degradation of materials caused by moisture, it can also effectively simulate the process of temperature upheaval and rain erosion.

Moisture is also the main factor causing damage to some materials. The higher the moisture content, the faster the damage to materials. Humidity can affect the degradation of indoor and outdoor products, such as various textiles. This is because when the material tries to maintain a moisture balance with the surrounding environment, the physical stress borne by the material itself increases. Therefore, the greater the humidity range in the atmosphere, the greater the overall stress on the material. The negative effect of humidity on the weatherability and colorfastness of materials has been widely recognized. The humidity function of the equipment can simulate the influence of indoor and outdoor humidity on materials.

The heating system of the equipment adopts far-infrared nickel chromium alloy high-speed heating electric heater; High temperature, humidity and illumination are completely independent systems (without mutual interference); The output power of temperature control is calculated by microcomputer to achieve high precision and high efficiency.

The humidification system of the equipment adopts an external boiler steam humidifier, with automatic water level compensation, water shortage alarm system, far-infrared stainless steel high-speed heating electric heating tube, and P I . D ＋S . S . R. The system is under coordinated control with the channel.

Meet the standard

QT-SN-150 xenon lamp aging test chamber is designed and manufactured in strict accordance with the technical parameters of GB/T 2423.14-95、GB/T 2423.24-2014.

Technical specification

1.Sample description
		This test equipment prohibits: Test and storage of samples of flammable, explosive and volatile substances Testing and storage of samples of corrosive substances Testing or storage of biological samples Test and storage of strong electromagnetic emission source samples
2.Volume and size
Nominal internal volume Working dimensions Sample tray size		150L Working dimensions：D600W500H500 Sample tray size：550*480mm
3.Detailed temperature ambient conditions
Test environmental conditions	The air flow around the equipment is smooth, without high concentration of dust, corrosive or flammable and explosive gases Ambient temperature is 5 ~ 32 ℃ Relative humidity ≤ 90RH
Temperature range: Blackboard temperature: Humidity range:	20 ℃ ~ 80 ℃ adjustable 40～100℃ ±3℃ 35～95% R•H adjustable
Temperature fluctuation	±0.5℃ Under no-load condition, when the equipment is in a stable state, the variation of the temperature at the center point of the working space with time, half of the difference between the measured maximum temperature and the minimum temperature, expressed in "±", that is, the temperature fluctuation degree ℃.
Temperature uniformity	≤ ±2℃ Under no-load condition, after the equipment reaches stability, the arithmetic mean value of the difference between the measured maximum temperature and the minimum temperature in each test, that is, the temperature uniformity.
4.Detailed specifications
	Xenon lamp source: air cooled lamp tube Quantity of xenon lamp: 1 Rainfall time: 0 ~ 9999min, continuous rainfall adjustable Rainfall period: 0 ~ 240Min, interval (break) rainfall adjustable Spray cycle (spray time / no spray time):18min/102min, 12min/48min or customized Rain water pressure: 0.12 ~ 0.15Mpa Nozzle diameter: Ф 0.8mm Xenon lamp power: 1.8kw Heating power: 2KW Humidification power: 2KW Distance between sample rack and lamp: 200 ~ 300mm Wavelength: 290 ~ 800nm The illumination cycle is continuously adjustable, time: 1 ~ 999h, m, s Irradiance: 500 w/ ㎡ ~ 750w/ ㎡

5.Structure characteristics

5.1.Thermal insulation enclosure

Outer wall material: the shell is processed by high-quality A3 steel plate CNC machine tool, and the shell surface is sprayed with plastic, which is more bright, clean and beautiful (now upgraded to arc corners); The liner is imported SUS304 high-quality stainless steel plate;

Inner wall material: stainless steel plate SUS304,

Thermal insulation material: high density glass fiber cotton with a thermal insulation thickness of 80mm;

5.2.control panel

Temperature control display screen, overtemperature protection setting device, emergency stop switch, operation indicator, fault indicator, operation button and lighting switch.

The mixing system adopts long shaft fan motor and stainless steel multi wing impeller with high and low temperature resistance to achieve strong convection and vertical diffusion circulation;

Double high temperature resistant high tension sealing strips are used between the door and the box to ensure the tightness of the test area; Non reaction door handle is adopted for easier operation;

6.Refrigeration and dehumidification system

6.1 Operation mode

Compressor: totally enclosed France Taikang 2.5hp × 1 ；

Refrigeration mode: mechanical single machine refrigeration;

Condensation mode: air cooled;

Refrigerant: R404A (environmental protection type);

All pipelines of the whole system shall be subject to 48 leak detection tests under ventilation and pressure;

Heating and cooling systems are completely independent;

Inner spiral refrigerant copper pipe;

Fin slope evaporator (with automatic defrosting system);

The drying filter, refrigerant flow window, repair valve, oil separator, solenoid valve and liquid storage tank all adopt imported original parts;

Dehumidification system: the evaporator coil dew point temperature laminar flow contact dehumidification method is adopted.

7.Circuit control system

7.1 Controls:

The equipment has a variety of cycle programs, blackboard temperature and test chamber air temperature and humidity to choose from, and is used to program and simulate different use environments. Exposure function: the temperature is controlled by the touch intelligent temperature controller with microcomputer automatic calculation and PID self-tuning function. The operation is simple and fast. The time can be divided into total time and illumination time. After setting, the equipment will automatically run according to the entered program. In case of any abnormality during the test or after the test, the equipment will immediately give an alarm and automatically terminate the test.

1. display: 7-inch color LCD.

2. operation mode: fixed value or program

3. setting mode: Chinese menu, touch screen input

4. program capacity: 120 groups and 1200 sections of test programs can be stored

5. program length: 99 segments at most for each group of programs

6. cycle times: each program segment can be cycled 999 times

7. setting range: temperature: -100 ℃ ~ +200 ℃, humidity: 0 ~ 99.9%rh,

Time: 0 ~ 99 hours and 59 minutes

8. resolution: temperature: 0.1 ℃, humidity: 0.1%rh, time: 0.1min

9. input: PT100 platinum resistance

10. communication function: the controller is equipped with rs232/485 interface

11. other functions: the equipment has various alarm protection functions such as over temperature, fan overheating, overcurrent, etc., and the fault self diagnosis function of the controller can ensure that once the equipment is abnormal, the power supply of main components will be cut off and an alarm signal will be sent at the same time.

7.2.Requirements for storage environment

Ambient temperature: 5 ℃ ~ ＋ 32 ℃

Ambient humidity: ≤ 85%;

Power requirements: AC380 (± 10%) v/50hz, 8kw.

Hot Tags: xenon lamp aging test chamber, Wholesale, Customized, China, Manufacturers, Suppliers, Factory